Companies
Active Energy Limited
Introduction
Registered in the United Kingdom with representative offices in East Kilbride, Birmingham, and London and manufacturing at East Kilbride; this company sells the VoltageMaster range of power optimising transformers.
These specialist transformers are installed in larger commercial facilities such as hotels, schools, government offices, retail outlets and factories. The units are fitted between the supply company meter and the internal distribution panel and have the potential to save up to 20% of electricity costs.
Savings Explained
There are two reasons why these savings are possible. Firstly, the UK and some European power generation and transmission systems were designed to provide voltage at around 240 volts. However electrical equipment is generally designed to operate at 220 Volts.
Secondly, power supply companies are required to maintain a minimum voltage throughout the entire distribution system. In order to achieve this, electricity suppliers provide a higher voltage at the power substation because there are natural voltage losses which increase with distance. As substations are often located close to larger users they are more likely to receive voltage greater than is necessary.
Carbon Emmissions
There is a direct connection between electricity consumption and CO2 / greenhouse gas emission. This is because a large proportion of electricity in the United Kingdom is produced by either oil or coal fired power stations.
There are established formulas available to calculate carbon emission per kilowatt hour of electricity and this can be used following installation of the transformers to demonstrate carbon footprint reductions.
Contact
TONY FREUDMANN
Director
Mobile +44 (0) 7785 306715
Email tony@active-energy.com
Web Link
Gasignition Ltd
Introduction
Registered and with representative offices in the United Kingdom, this company has customers throughout the United Kingdom and Europe and supplies power cords, spark modules, high voltage internal wiring and spark electrodes to small and medium sized manufactures of stoves, hobs, boilers, heaters and dryers.
The experienced technical sales staff located in the United Kingdom are able to assist customers in the design and development of ignition systems for any gas appliance.
Customer service and accounting staff are located at the manufacturing facility in Thailand and from there they co-ordinate the manufacture of customer requirements in a timely manner to enable shipment by sea from Thailand to Europe and the United Kingdom. Gasignition receives the goods in the United Kingdom and then delivers directly to customers.
Products
The range of products available include but are not limited to:
- Spark Electrodes
- Spark Generators
- Wiring
- Power Cords
Contact
BILL REEDIE
Business Development Manager
Mobile +44 (0) 7801 079854
Email bill.reedie@gasignition.com
Web Link
Derlite Co Ltd
Introduction
This Company is registered in Thailand and manufactures most of the components offered by the group.
The plant and equipment at the manufacturing facility includes: plastic injection moulding, high volume precision stamping, vacuum resin dispensing, circuit board component placement and flow soldering, cable and wire cutting, stripping and terminal fixing as well as experienced assembly staff. Derlite has fully qualified quality and technical support staff to ensure consistent standards.
Derlite sells directly to some larger customers in the United Kingdom and European and to the group customers located in USA, Mexico and Australia as well as Thailand. Technical sales agents are located in Tennessee, USA and San Luis Potosi, Mexico.
Products
- Spark Electrodes
- Spark Generators
- Wiring
- Power Cords
- Plastic Mouldings
- Circuit Boards
- Stamped Metal Parts
Contacts
| Thailand | USA | Mexico |
|---|---|---|
| WANNA KWANCHOOD | RANDY MACLENDON | EDURADO CORDOBA |
| Sales Manager | Sales Agent | Sales Agent |
| Mobile +66 (0) 81 488 1142 | Phone +1 (0) 423 892 8733 | Phone +52 (0) 444 811 5680 |
| Email wanna.k@derlite.com | Email randymcl@bellsouth.net | Email cordoba.eduardo@gmail.com |
Web Link
Component Imports
Introduction
This United Kingdom based operation is a division of Gasignition Ltd and specializes in sourcing components from Asia for small to medium sized manufacturing companies.
The sales and technical support office is located in Edinburgh and is able to source almost any manufactured item that may be required. The company has a network of established reliable suppliers located throughout China, Thailand, Malaysia and Singapore.
After technical analysis, translation of requirement, identification of appropriate supplier Component Imports will place orders with the selected supplier, and arrange shipment, import and delivery to the customer.
Customers may either purchase the imported product directly from Gasignition Ltd or alternately pay a percentage fee for the services outlined.
Products
- Power Cords
- Plastic Mouldings
- Circuit Boards
- Stamped Metal Parts
- Ceramic Parts
- Control Valves
- Solenoid Switches
- Copper Wire
- Other Components - as requested
Contact
BILL REEDIE
Business Development Manager
Mobile +44 (0) 7801 079854
Email bill.reedie@component-imports.com
Web Link
